American Standard R117 Rough Valve Body with 1/2-Inch PEX Inlets/Direct Sweat Outlets
description: Function Options:PEX Inlets/Direct Sweat Outlets Cast brass body, washerless ceramic disc valve cartridge with back-to-back capability and hot limit safety stop. Cycles from 'off' to 'cold' to 'hot'. Pressure balancing cartridge maintains constant output temperature in response to changes in relative hot and cold supply pressure. One-half inch inlets and outlets (choice of direct sweat, threaded, or PEX). Available with screwdriver stops. Rough-in plaster guard designed for use as thin-wall mounting adaptor. Valve body will accept a variety of decorative Bath/Shower trims. Product Features: Cast Brass Valve Body: Durable - Quality that will last a lifetime. Ideal material for prolonged contact with water. Ceramic Disc Valve Cartridge: Assures a lifetime of drip-free performance. Allows easy fine tuning of temperature (125 handle rotation from off to hot). Pressure Balancing Valve Cartridge: Maintains constant output temperature in response to changes in hot and cold supply pressure. Diaphragm system engineered to eliminate cross flow. Avoids failure due to mineral deposits - ideal for u
Features :
- Rough valve body
- Mixing valve with volume control and hot limit safety stop
- 1/2" PEX inlets/direct sweat outlets
- Less handle and trim
- To be used with crimp ring system
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [amazon.com or endless.com, as applicable] at the time of purchase will apply to the purchase of this product.
CERTAIN CONTENT THAT APPEARS
Amazon, the Amazon logo, Endless, and the Endless logo are trademarks of Amazon.com, Inc. or its affiliates.
category: Faucet Parts
Marke: American Standard
product rating : 4.0
[has_totalreviews]Rating : totalreviews[/has_totalreviews]
Review : Not as pictured
The picture of this valve is not as pictured. It should show two PEX fittings, one on both sides of the valve assembly. As shown here, the water inlets are sweat fittings.
The valve is nice, with a heavy brass case, and quality plastic valve assembly.
Just FYI, you will have to disassemble the valve when you sweat the top and bottom fitings...otherwise you will melt the plastic valve assembly. This is fairly standard for valves of this type with sweat fittings.
0 opmerkings:
Plaas 'n opmerking